The RCVIX T550 is the tracked workhorse of the line: a 550 mm cutting width, crawler drive, and a low center of gravity tuned for slopes and rough ground. If your work is embankments, dam faces, steep orchard rows or solar sites on uneven land, this is the unit we point you to. This guide covers where it wins, the specs that matter, and how to choose the right configuration.
Where the T550 wins
- Steep slopes: crawler traction and a low, wide stance hold grades where ride-ons tip.
- Rough / rocky ground: tracked drive spreads load and rides over debris better than wheels.
- Embankments & dams: the operator stays on safe ground; the machine takes the face.
- Mixed growth: a flail head shreds brush, suckers and prunings, not just grass.
Specs that matter
| Spec | What to look for |
|---|---|
| Cutting width | 550 mm — balanced for row access and throughput |
| Drive | Crawler tracks for grade holding and low ground pressure |
| Head | Flail for brush; confirm lug count for your material |
| Power | Gas or hybrid — match to daily run hours |
| Remote | 2.4 GHz with line-of-sight range and e-stop |
Choosing the right configuration
- Measure your worst case: steepest angle, narrowest gap, heaviest growth.
- Pick the head: flail for brush and prunings; a finer setup for clean turf.
- Pick the power: hybrid if you run long days; gas if you want simple field service.
- Confirm the remote: range covers your longest run; e-stop is instant.
T550 vs the W500 (wheeled)
The W500 is the wheeled sibling — faster and cheaper on flat, clean blocks, but it gives up slope and rough-ground grip to the tracked T550. Rule of thumb: flat and fine → W500; slope, rock or brush → T550.
Frequently asked questions
Q: How steep can it go?
A: On suitable, firm ground it is rated for steep work; always judge the substrate, not just the number, and stay within the rated angle.
Q: Flail or rotary?
A: For the T550's typical brush-and-slope job, flail is the better call — it shreds coarse material and resists clogging.
Q: Can a dealer service it locally?
A: Yes — our distributor program puts spares and training with local partners.
Next step
Talk to us with your slope angles, gaps and growth type — contact us and we will size a T550 configuration. For heavier flail clearing, see the F1000.
